function doNew1(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" " newcontent+=" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
" newcontent+="

" newcontent+="
" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+="Excellent dimensional stability due to plastic base.
  • " newcontent+=" Combination of Mexican fibre and Stainless Steel wire 0.07mm dia provides effective cleaning.
  • " newcontent+=" One row of stainless steel wire is spirally mounted on the entire length of the brush.
    " newcontent+="" newcontent+="" myWind.document.write(newcontent) myWind.document.close() } function doNew2(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent ="T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+=" No warping even in high humidity level during working condition.
  • " newcontent+=" Embedding of cotton and trash on the unicombs is totally avoided.
  • " newcontent+=" The fine needles in unicombs do not get jammed.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew4(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent ="T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+="Feed roller has been advanced by 10mm and a pressure bar has been provided to attain an ideal short nipping distance(38 mm).
  • " newcontent+="Improved Nipper grip and feed roller grip by provision of calibrated springs to take Heavier Lap weights.
  • " newcontent+="The nipper form profile (double clamping distance has been" newcontent+="increased to 3.5mm by adapting C.A.M.P technique.
  		•
    " newcontent+="Conical Nipper pins with tension elements and retaining bars has been provided on the Bottom Nippers.
  		•
    " newcontent+="Modified nipper geometry helps in noil saving and increase in production.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew5(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S " newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+=" 1.5%-2% noil saving (depending on staple length) for existing" newcontent+="yarn imperfection and CSP Levels.
  • " newcontent+=" 10%-15% increase in production due to process of heavier laps.
  • " newcontent+=" Improved sliver quality with reduction in nep levels and thick places.
  • " newcontent+=" Enhanced nipper life due to improved construction.
  • " newcontent+=" Shortest pay back." newcontent+="
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew6(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+=" Because of 40mm Pressure saddless the nipping distance is reduced by 1mm.
  • " newcontent+="Due to direct loading even pressure is obtained for both Top Rollers.
  • " newcontent+=" Removal of Static electricity in web by provision of static discharge kit.
  • " newcontent+=" User friendly design by adapting C.A.M.P. technique.
  • " newcontent+="Because of top Roller offset improved grip is obtained between Bottom and Top Detaching Rollers.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew7(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+="Hence selective fiber separation is achieved.
  • " newcontent+=" Better U% level due to even pressure in loading.
  • " newcontent+=" No lapping problems in detaching rollers.
  • " newcontent+=" No frequent maintenance is involved.
  • " newcontent+=" 10-15% reduction in auto coner cuts due to improved grip.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew8(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+=" The direct loading high power of the nipper pair" newcontent+=" ensures perfect processing of heavier laps.
  • " newcontent+=" Feed roller has been moved closure to the nipping point and a pressure bar has been provided.
  • " newcontent+=" The nipper grip has been modified to 3.5mm by adapting C.A.M.P Technique.
  • " newcontent+=" Forward and backward feed is obtained in the same Ratchet" newcontent+=" Wheel by changing the Ratchet Pawl.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew9(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+=" Increase in production due to process of Heavier laps.
  • " newcontent+=" 2-3% saving in noil due to selective fibre separation.
  • " newcontent+="Improved sliver quality with reduction in nep levels and thick places.
  • " newcontent+=" Change over from forward to backward motion in the shortest time.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew10(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+="Colour Pigments are added in base material to obtain different colors.
  • " newcontent+=" Vent holes are provided in the Spools for Release of compressed air during lap winding.
  • " newcontent+="Spools are heat - stabilized for low moisture absorption and excellent dimensional stability.
  • " newcontent+=" High wear resistace and impact resistance due to better hardness and smooth surface finish.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew11(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent ="T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+="Four colours are offered for easy identification during process.
  • " newcontent+=" Reduction in lap hairiness and lap licking due to release of compressed air.
  • " newcontent+="Longevity in life due to low wear and less breakages.
  • " newcontent+="Reduction in lap waste due to better take up of lap winding.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew12(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+="Top comb holders are equipped with air chambers.
  • " newcontent+="Air Flow is Even through out the area of the needles.
  • " newcontent+="Timing of blowing is precise and hence no disturbance for combing and piecing.
  • " newcontent+="Sequence of blowing can be varied from once in 2 nips to once in 64 nips(Steps 2,4,16,32,64).
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew13(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+=" " newcontent+=" " newcontent+=" " newcontent+="
  • " newcontent+="Better combing quality due to 100% clean top Comb.
  • " newcontent+="Increase in life of Top Comb strips as Clogging of fibers are prevented.
  • " newcontent+="Consistency in quality.
  • " newcontent+=" Shorter stoppage of machine.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew15(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent ="T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+=" The Top comb needles are clamped on both sides.
  • " newcontent+=" Top Combs are made out of Spring Steel and are specially treated for superior finish.
  • " newcontent+=" Imported Hardened needles (K20) are used.
    " newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() } function doNew14(form) { var myWind = "" myWind = window.open("","","HEIGHT=350,WIDTH=500") var newcontent =" T E X T E C H   I N D U S T R I E S" newcontent+="" newcontent+="" newcontent+="
    " newcontent+="

    " newcontent+="
    " newcontent+="" newcontent+="" newcontent+="" newcontent+="
  • " newcontent+="Longevity in life of needles due to both sides clamping.
  • " newcontent+=" Hence no accumulation of micro dust on the plates.
  • " newcontent+=" Hence total avoidance of needles getting bent during working.
    " newcontent+="" newcontent+="" newcontent+=" " myWind.document.write(newcontent) myWind.document.close() }